Side wires and cables Cuvaskabel BIF, BIFE, MGTF, BPDO, etc.

BEEF, BEEF, BEEF, BEEF-N, BEEF-N, BEEF-N

The wires are on-board. Designed for fixed installation of the on-board electrical network of aviation equipment and operation at a voltage of up to 250V AC frequency up to 6000 Hz (350V DC) at atmospheric pressure up to 0.67 kPa or 600V AC frequency up to 6000 Hz (750V DC) at atmospheric pressure up to 60 kPa.

• BEEF, BEEF, BEEF, BEEF-N, BEEF-N, BEEF-N. Technical description

BIFM, BIFME, BIFME, BIFM-N, BIFME-N, BIFME-N

The wires are lightweight on-board. Designed for fixed installation of the on-board electrical network of aviation equipment and operation at voltages up to 250V AC frequency up to 6000 Hz (350V DC) at atmospheric pressure up to 0.67 kPa or 600V AC frequency up to 6000 Hz (750V DC) at atmospheric pressure up to 60 kPa.

• BIFM, BIFME, BIFME, BIFM-N, BIFME-N, BIFME-N. Technical description

MGTF, MGTFu, MGTFE

The mounting wires are heat-resistant with fluoroplast insulation. Designed for indoor and interblock installation of various electronic and electrical equipment and operation at a rated voltage of 250V AC frequency up to 5 kHz or 350V DC.

• MGTF, MGTFu, MGTFE. Technical description

MK 26-13, FE 26-13

The mounting wires are heat-resistant with fluoroplast insulation. Designed for the installation of electrical equipment operating at a voltage of up to 250V, with a frequency of 5 kHz or 350V DC.

• MK 26-13, FE 26-13. Technical description

MP 35-110, MPE 35-110

The wires are mounting. Designed for installation of electrical equipment operating at a voltage of up to 500V with a frequency of 10 kHz or 700V DC at temperatures from -60 ° C to +155 ° C.

• MP 35-110, MPE 35-110. Technical description

MP 37-12, MPE 37-12

The wires are mounting. Designed for mobile and fixed mounting of non-block, inter-block, intra-device and inter-device connections in electronic and electrical devices at a nominal alternating voltage of 500V with a frequency of 10 kHz and a constant voltage of 700V.

• MP 37-12, MPE 37-12. Technical description

MPO 33-11, MPOE 33-11

The wires are mounting. Designed for mobile and fixed installation of intra-block, inter-block, intra-device, inter-device connections in electronic and electrical devices at an operating alternating voltage of 500V with a frequency of 10 kHz and a constant voltage of 700V.

• MPO 33-11, MPOE 33-11. Technical description

MS(E)(O) 16-13, MS(E)(O) 16-33, MS(E)(O) 26-13, MS(E)(O) 26-33, MSEO 16-13m

On-board mounting wires with insulation made of sintered film. Designed for operation at rated alternating voltage of 100, 250V with a frequency of up to 10 kHz or constant voltage of 150, 350V.

• MS(E)(O) 16-13, MS(E)(O) 16-33, MS(E)(O) 26-13, MS(E)(O) 26-33, MSEO 16-13m. Technical description

BPDO, BPDOE

On-board wire with double irradiated insulation. Designed for fixed intra-assembly and inter-assembly installation of electrical devices and terminal ends of on-board electrical equipment of aviation equipment at a voltage of up to 600V AC with a frequency of up to 2000 Hz or a constant voltage of up to 850V.

• BPDO, BPDOE. Technical description

MS 16-14

Installation wires with fluoroplast insulation-4MB. Designed for operation at rated voltage up to 100V AC frequency up to 50 MHz, DC or pulse voltage up to 150V.

• MS 16-14. Technical description

BS 35-1298, BSE 35-1298

The side wires are made of a cross-linked fluoroplastic composition. Designed for internal installation of electrical appliances and electronic equipment and work at a voltage of 600V AC frequency 2000 Hz and a constant voltage of 850V.

• BS 35-1298, BS 35-1298. Technical description

PUM, PUMM, PUM-1

Wires can have solid or combined colors. The combined coloring is made by a combination of parallel stripes of two colors, one of which is taken as the main one.

Catalog