Mounting wires and cables Cuvaskabel MPO, MPOE, VPF, KIFEF, MS, etc.

MPO, MPOE

The mounting wires are heat-resistant with insulation made of radiation-crosslinked polyethylene. Designed for fixed intra- and inter-assembly installation of electrical devices at rated voltage up to 380V AC frequency up to 2 kHz and up to 160V up to 4 kHz or 550V DC.

• MPO, MPOE. Technical description

VPF, VPFu

The wires are high-voltage, designed to work in the device of electric ignition of gas stoves at a voltage of up to 15 kV of pulsed current.

• VPF, VPF. Technical description

KIFEF

The cables are heat-resistant based on twisted pair. Designed for data transmission on board vehicles, including for use in internal installations, and operation at a voltage of up to 100 V at a frequency of up to 10 MHz.

• KIFEF. Technical description

MS 15-15

Mounting wire with fluoroplast insulation-4MB. It is designed for fixed installation by winding and working at a voltage of up to 100 V at a frequency of 550 kHz or a constant voltage of up to 150 V.

• MS 15-15. Technical description

NV(E), NVM (E), NV (bs)

The wire is mounted with plastic insulation. For operation in circuits of electrical devices for industrial purposes, at a rated voltage of 600 and 1000 V of frequency up to 10 kHz and a constant voltage up to 840 and 1400 V, respectively.

• NV (E), NVM (E), NV (bs). Technical description

MS 26-15, ITU 26-15, ITU 26-15

Mounting wires with polyamide insulation. Designed for intra-block and inter-block connections of electrical appliances and devices operating at a voltage of up to 250V with a frequency of up to 10 kHz or a constant voltage of up to 350V

• MS 26-15, ITU 26-15, ITU 26-15. Technical description

MS 16-15, ITU 16-15, MS 16-35, ITU 16-35

Mounting wires with polyamide insulation. Designed for intra-block and inter-block connections of electrical devices and apparatuses for operation at a voltage of up to 100V with a frequency of up to 10 kHz or a constant voltage of up to 150 V.

• MS 16-15, ITU 16-15, MS 16-35, ITU 16-35. Technical description

MSu 16-13m 2x0,03, MSu 16-13c 2x0,03

Two-core mounting wires with thin insulation. Designed to operate at an alternating voltage of up to 30 V with a frequency of up to 2000 Hz.

• MSu 16-13m 2x0,03, MSu 16-13c 2x0,03. Technical description

MS 15-18, MS 15-11, ITU 15-11, ITU 15-11

The mounting wires are designed to operate at a nominal AC voltage of 100V with a frequency of up to 50 MHz or 150V DC or pulse voltage.

• MS 15-18, MS 15-11, ITU 15-11, ITU 15-11. Technical description

MK 26-14, FE 26-14, FEO 26-16

Mounting wires with polyimide insulation, resistant to pyrolysis. Designed for fixed and movable installation of in-block, inter-block, intra-device and inter-device connections in electronic and electrical devices at a nominal alternating voltage of 250V with a frequency of 10 kHz and a constant voltage of 350V.

• MK 26-14, FE 26-14, FEO 26-16. Technical description

MKSH, MKESH

Multi-core mounting cables with plastic insulation. Designed for fixed inter-assembly installation of electrical devices operating at voltages up to 500V AC frequency up to 400 Hz or up to 700V DC.

• MKSH, MKESH. Technical description

MKVV, MKVEV

The cable is mounting. Designed for installation of alarm systems, security, communications, electrical networks at rated voltage of 600 and 1000 V.

• MKVV, MKVEV. Technical description

MGLF (E) (F)

The mounting wire is heat-resistant with fluoroplast insulation. It is used for intra-block and inter-block connections of electrical devices and equipment for operation at a nominal voltage of up to 600 V of frequency up to 1 kHz or a constant voltage up to 840 V.

• MGLF (E)(F). Technical Description

MGSHV, MGSHVE

Installation wires with fiber and PVC insulation. Designed to operate at an operating AC voltage of up to 380V for cross sections of 0.12; 0.14 mm2 and 1000V for cross sections of 0.20-0.50 mm2 frequency up to 10 kHz and constant voltage up to 500 and 1500 V.

• MGSHV, MGSHVE. Technical description

Catalog